/

Daveynel

Daveynel

Daveynel® Non-Electric Detonators

The Daveynel non-electric product line consists of downhole detonators, surface connector (low strength detonators), and dual end detonators (one downhole and one surface).  The non-electric tubing is made with extruded polyethylene. The inner surface is coated with an HMX/Al powder. The downhole detonators are #8 strength by United States Bureau of Mines standards.  The surface detonators are low-strength and made to only initiate other non-electric shock tubes.

  • DaveyQuick® Dual End Non-Electric Detonator

    The DaveyQuick® Dual End Non-Electric Detonators consist of a DaveyNel® Downhole detonator and a DaveyNel® Surface Connector detonator in one assembly. The surface detonator is housed in a plastic block connector to allow for connection and initiation of up to five shock tubes with the standard Hook connector, eight shock tubes can be connected with the optional S-Clip connector. The surface connector is color coded according to the delay of the surface detonator for quick and easy visual identification. A water resistant label is also attached that contains the delay periods, shock tube length, and lot number to provide traceability. The downhole detonator component is available in an array of both short period (SP) and long period (LP) delays to accommodate a wide variety of surface and underground mining, quarrying, and construction applications. The DaveyQuick® Dual End Non-Electric Detonators are also available in an assortment of lengths and surface/down hole delay timing configurations to accommodate each customer’s site specific needs.

  • DaveyNel® Surface Connector - Low Strength Non-Electric Detonator

    The DaveyNel® Surface Connector is a low strength non-electric detonator consisting of a fixed length of shock tube assembled to a surface delay detonator housed in a plastic block connector. The standard Hook style connector allows for the connection and initiation of up to five shock tubes. Eight shock tubes can be connected with the optional S-Clip connector. The free end of the shock tube is sealed. An optional J-Hook connector can be ordered on the free end to allow for initiation via detonating cord (5 gram/meter or 25 grain/foot minimum). The surface connector is color coded according to the delay of the detonator for quick and easy visual identification. A water resistant label is also attached that contains the delay period, shock tube length, and lot number to provide traceability. The DaveyNel® Surface Connector detonators are available in an array of lengths and delay timings to accommodate a wide variety of surface and underground mining, quarrying, and construction applications.

  • DaveyNel® Downhole Non-Electric Detonator

    The DaveyNel® Downhole Non-Electric Detonators consist of a fixed length of shock tube assembled with a #8 strength (USBM) detonator at one end. The free end of the shock tube is sealed. An optional J-Hook connector can be ordered on the sealed end to allow for initiation via detonating cord (5 gram/meter or 25 grain/foot minimum). The DaveyNel® Downhole Non-Electric Detonators are available in an array of lengths, and both SP and LP delay periods. They are suitable for use as an in-hole detonator for initiating cast boosters, cap sensitive packaged explosives, or dynamite in a wide variety of surface and underground mining, quarrying, and construction applications. A water resistant label is also attached that contains the delay period, shock tube length, and lot number to provide traceability.